Aspire unveils the third version of its Nautilus atomizer. The workhorse of Aspire is renewed in a new design that is larger than the previous models but maintaining the tight pull cheek vape feature.
Tank with a capacity of 4ml compatible with all the resistors of the Nautilus series by Aspire and Vaptio Cosmo .
Aspire unveils the third version of its Nautilus atomizer. The workhorse of Aspire is renewed in a new design that is larger than the previous models but maintaining the tight pull cheek vape feature.
Tank with a capacity of 4ml compatible with all the resistors of the Nautilus series by Aspire and Vaptio Cosmo .
Furthermore, the new Nautilus 3 allows a simple installation of the resistance with the Press to Fit technology.
Thanks to the air regulation ring , located at the bottom of the atomizer, the flow of the Nautilus 3 is precisely adjustable . It is possible to obtain seven different air flows ranging from 0.8mm opening to 3mm .
The Nautilus 3 features a simple top-up liquid refill . To do this, simply slide the top cap so that the filling opening is uncovered.
Data sheet
Specific References
Replacement resistance Vaptio Cosmo C1 from 1.6 oHm. Compatible with COSMO kit and Aspire Nautilus Kizoku Limit etc ...
Replacement resistance Vaptio Cosmo C2 from 0.7 oHm. Compatible with COSMO kit and Aspire Nautilus Kizoku Limit etc ...
Replacement resistance Vaptio Cosmo C3 from 1.2 oHm. Compatible with COSMO kit and Aspire Nautilus Kizoku Limit etc ...
Aspire drip tip with 510 connection in steel version with long tip.
Compatible with Nautilus series atomizers or other 510 attachment cheek atomizers (Almost all atomizers except lung atomizers).
0.4oHm Aspire BVC resistance optimal for an open semi-lung shot on Nautilus , Vaptio Cosmo , Kizoku Limit and Shima atomizers.
Power range supported by the resistance: 23 - 28W
Aspire replacement glass for Nautilus 3 Tank Atomizer. Original Aspire tank with 4ml liquid holding capacity.
Vaptio Cosmo C5 1.0oHm resistance with mesh structure for Vaptio Cosmo atomizers and electronic cigarettes. Vaptio Cosmo resistors are compatible with Aspire Nautilus atomizers and can replace Aspire BVC resistors.
The Vaptio C5 resistance can be used for a cheek vape.
Recommended power range: 8-13W
Aspire Nautilus 3 22mm 3ml Atomizer is the new reduced diameter version of Aspire \'s Nautilus 3.
The capacity of the 2mm Nautilus 3 is 3ml and this new version has the CRC safety system , which avoids accidental opening by children .
Aspire Nautilus 3S 4ml 24mm Atomizer is the special version of the Aspire Nautilus 3 tank and introduces an elegant metal honeycomb tank coating . Nautilus 3S has a 4ml capacity tank and uses the same resistances as the Nautilus family , which offer an MTL cheek pull experience and extreme taste.
MOK TFV16 is a Tank atomizer designed on 32mm diameter and having a liquid capacity of 9ml, with its new Coils suitable for high Wattages it will bring you to a massive production of vapor with excellent aromatic yield.
Innokin Zlide, MTL atomizer in collaboration with Phil Busardo, Dimitris Agrafiotis and the Innokin house.
Modern design, 24mm, 4ml tank, bottom airflow, completely removable, interchangeable pyrex, 510 resin drip tip, childproof top frefil.
GeekVape\'s Z Max Tank GeekVape is the atomizer designed for Lung shooting enthusiasts (DTL) and to fit the largest box mods on the market. The Z Max like the other atomizers of the GeekVape Z family, offers an airflow from the top that will avoid any risk of leaks .
The atomizer allows for top liquid filling and ready-to-mesh resistors that are easy to change.
Old School atomizer from Joyetech made in the Neo-Georgian style. With a new MGS head and a large drip tip it achieves very low resistances.
Its well thought out design hides a very large tank with liquid refill from the top.
JustFog clearomizer Q16 Pro with 1.9 ml capacity, with top refill, star Shield system and air control with lever.
Millennium GC MTL atomizer - The Vaping Gentlemen Club has been specifically designed for use for MTL cheek vape and restricted flavor RDL . This device uses resistances from the Nautilus, Vaptio Cosmo and similar series , offering a qualitatively equivalent use experience to that of a regenerable atomizer, but with the practicality of prefabricated heads.
Geekvape Zeus Nano Tank 2 with 3.5 ml reservoir is the new revised version atomizer Geekvape Zeus Nano.
The new version features substantial improvements to the airflow and aesthetics of the product. The already performing airflow in the first version has been revisited to offer greater performance both in cheek and semi-pulmonary vaping .
Zeus Z Sub Ohm Tan k atomizer by GeekVape is an excellent atomizer with resistance lung pull , created to meet the needs of vapers who prefer this type of approach to vaping, with a design that amiably recalls the structure of the regenerable Zeus RTA and Zeus X RTA, without compromising the performance of its predecessors.
The resistors supplied belong to the Z Series , which use the innovative Mesh system to optimize the flavor of the liquid and the production of steam.
Aspire unveils the third version of its Nautilus atomizer. The workhorse of Aspire is renewed in a new design that is larger than the previous models but maintaining the tight pull cheek vape feature.
Tank with a capacity of 4ml compatible with all the resistors of the Nautilus series by Aspire and Vaptio Cosmo .
