Aspire Nautilus 3S 4ml 24mm Atomizer is the special version of the Aspire Nautilus 3 tank and introduces an elegant metal honeycomb tank coating . Nautilus 3S has a 4ml capacity tank and uses the same resistances as the Nautilus family , which offer an MTL cheek pull experience and extreme taste.
Aspire Nautilus 3S 4ml 24mm Atomizer is the special version of the Aspire Nautilus 3 tank and introduces an elegant metal honeycomb tank coating . Nautilus 3S has a 4ml capacity tank and uses the same resistances as the Nautilus family , which offer an MTL cheek pull experience and extreme taste.
Replacing the resistors is very simple . Thanks to the innovative system of the Nautilus 3 it is not necessary to empty the tank: just unscrew the upper part of the atomizer and proceed with the replacement.
The Adjustable airflow allows seven different options, in order to guarantee maximum customization, going from a restricted MTL cheek pull to an RDL semipulmonary pull.
There charging of the liquid is carried out from above quickly and easily by sliding the top cap.
Data sheet
Specific References
Replacement resistance Vaptio Cosmo C1 from 1.6 oHm. Compatible with COSMO kit and Aspire Nautilus Kizoku Limit etc ...
Replacement resistance Vaptio Cosmo C2 from 0.7 oHm. Compatible with COSMO kit and Aspire Nautilus Kizoku Limit etc ...
Replacement resistance Vaptio Cosmo C3 from 1.2 oHm. Compatible with COSMO kit and Aspire Nautilus Kizoku Limit etc ...
Aspire unveils the third version of its Nautilus atomizer. The workhorse of Aspire is renewed in a new design that is larger than the previous models but maintaining the tight pull cheek vape feature.
Tank with a capacity of 4ml compatible with all the resistors of the Nautilus series by Aspire and Vaptio Cosmo .
0.4oHm Aspire BVC resistance optimal for an open semi-lung shot on Nautilus , Vaptio Cosmo , Kizoku Limit and Shima atomizers.
Power range supported by the resistance: 23 - 28W
Aspire replacement glass for Nautilus 3 Tank Atomizer. Original Aspire tank with 4ml liquid holding capacity.
Vaptio Cosmo C5 1.0oHm resistance with mesh structure for Vaptio Cosmo atomizers and electronic cigarettes. Vaptio Cosmo resistors are compatible with Aspire Nautilus atomizers and can replace Aspire BVC resistors.
The Vaptio C5 resistance can be used for a cheek vape.
Recommended power range: 8-13W
Aspire Nautilus 3 22mm 3ml Atomizer is the new reduced diameter version of Aspire \'s Nautilus 3.
The capacity of the 2mm Nautilus 3 is 3ml and this new version has the CRC safety system , which avoids accidental opening by children .
Aspire Nautilus BVC Mesh 0.3oHm resistance for Aspire Nautilus Series atomizers. Also compatible with Vaptio Cosmo Series atomizers.
The BVC Resistance with 0.3oHm Mesh structure is ideal for those looking for an intense and warm shot, very often comparable to a semi-pulmonary shot but also excellent for high wattage cheek shots .
Usage range: 23 - 28W
Innokin Zlide Top Tank atomizer 4,5ml it\'s a cheek spray atomizer designed to offer a simple and functional user experience.
Thanks to the air adjustment ring located at the top , the atomizer will be leak-proof . Also allowing you to have a different and superior aromatic yield compared to the previous versions of Innokin Zlide and Zenith, while maintaining the same Z Coil resistances . The upper liquid refill system , through a door that is pushed forward, you can refill the liquid quickly and cleanly. Without the risk of getting your hands dirty.
Aspire Nautilus 3 22mm 3ml Atomizer is the new reduced diameter version of Aspire \'s Nautilus 3.
The capacity of the 2mm Nautilus 3 is 3ml and this new version has the CRC safety system , which avoids accidental opening by children .
Atomizer compatible with the Vaptio Cosmo Kit, with a 2 ml liquid capacity and easily usable in both DL and MTL mode.
Compatible with Aspire BVC Coil resistors (1.6 - 1.8 - 1.2ohm)
Old School atomizer from Joyetech made in the Neo-Georgian style. With a new MGS head and a large drip tip it achieves very low resistances.
Its well thought out design hides a very large tank with liquid refill from the top.
Boasting an almost complete overhaul of Zenith\'s original MTL design, the Innokin Zenith 2 Tank atomizer offers a refined appearance, with enhanced performance and a more compelling design than previous models.
Thanks to the 5.5ml capacity , Zenith 2 will be able to accompany you throughout the day.
Vaporesso iTank 2 Atomizer 8ml is a 24.5mm diameter lung puff atomizer, successor of the acclaimed previous model, the Vaporesso iTank. This new version features improvements in terms of use. First of all, the top liquid refill system has been modified, making refilling easier and safer.
Millennium GC MTL atomizer - The Vaping Gentlemen Club has been specifically designed for use for MTL cheek vape and restricted flavor RDL . This device uses resistances from the Nautilus, Vaptio Cosmo and similar series , offering a qualitatively equivalent use experience to that of a regenerable atomizer, but with the practicality of prefabricated heads.
MOK TFV16 is a Tank atomizer designed on 32mm diameter and having a liquid capacity of 9ml, with its new Coils suitable for high Wattages it will bring you to a massive production of vapor with excellent aromatic yield.
Aspire Nautilus 3S 4ml 24mm Atomizer is the special version of the Aspire Nautilus 3 tank and introduces an elegant metal honeycomb tank coating . Nautilus 3S has a 4ml capacity tank and uses the same resistances as the Nautilus family , which offer an MTL cheek pull experience and extreme taste.
