NexMesh Wotofo Chill A1 0.15oHm Resistors

Wotofo
€0.82
Consegna il giorno successivo se ordini entro le 12:00

Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.

Suitable and compatible with Wotofo Profile 1.5.

Quantity
Disponibilità immediata

Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.

Suitable and compatible with Wotofo Profile 1.5.


Package contents:

  • 1x Mesh NexMesh Wotofo Chill A1
CHILLA1-WO

Prodotti correlati

Rebuildable Atomizers Wotofo Profile M RTA 4ml Rebuildable Atomizers Wotofo Profile M RTA 4ml

Wotofo Profile M RTA 4ml

Brands: Wotofo
€35.61

Wotofo Profile M RTA 4ml is a pure RTA atomizer. With the tank capacity of 3ml ( expandable to 4ml with the bubble glass ) and the well-proven mesh compatible deck, very similar to its predecessors.

The small size of this RTA (24.5 x 27.8mm) means that the vapor travels as little as possible, thus keeping the original aroma of the liquid intact .

Designed for accurate air distribution , this atomizer has a top airflow system that divides through a honeycomb in the internal bell and touches the entire surface of the coil, bringing out all the nuances of flavors.

The Profile M is also designed to be leak-proof , in addition to the exceptional aromatic yield, in fact, this atomizer never leaks!

Rebuildable Atomizers Wotofo Profile X RTA atomizer 8ml Rebuildable Atomizers Wotofo Profile X RTA atomizer 8ml

Wotofo Profile X RTA atomizer 8ml

Brands: Wotofo
€41.42

Wotofo Profile X RTA Atomizer 8ml is the new rebuildable atomizer for lung shooting , the result of meticulous engineering, increasing the performance of the original Profile RTA. With a 8ml tank, the Profile X RTA is a single mesh RTA with the ability to accommodate classic single or dual wire coil setups. This new version also manages the air flow directly from above, avoiding possible liquid spills.

8 other products in the same category

Premade resistors Pre-Made Resistors MTL 26ga Ni80 0.6oHm - Yatchvape Premade resistors Pre-Made Resistors MTL 26ga Ni80 0.6oHm - Yatchvape

Pre-Made Resistors MTL 26ga Ni80 0.6oHm -...

Brands: Yatchvape
€0.50

Premade Resistors MTL 26ga Ni80 0.6oHm - Yatchvape are premade resistors for regenerable atomizers .

The 26ga MTL resistors in 0.6oHm Ni80 material are optimized for use on regenerable atomizers with side vape . The coils have an internal diameter of 2.5mm and allow an abundance of cotton in the regeneration phase.

Premade resistors Prefatte Coil in Ni80 Dovpo Premade resistors Prefatte Coil in Ni80 Dovpo

Prefatte Coil in Ni80 Dovpo

Brands: Dovpo
€0.82

Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.