NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
OFRF NexMesh Mesh Resistors with 16mm by 6.8mm measurement.
The new Mesh resistors from OFRF offer faster heating than other types of mesh coils.
Suitable and compatible with Wotofo Profile 1.5.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Resistors Mesh NexMesh Turbo A1 Wotofo from 0.13oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Wotofo Profile M RTA 4ml is a pure RTA atomizer. With the tank capacity of 3ml ( expandable to 4ml with the bubble glass ) and the well-proven mesh compatible deck, very similar to its predecessors.
The small size of this RTA (24.5 x 27.8mm) means that the vapor travels as little as possible, thus keeping the original aroma of the liquid intact .
Designed for accurate air distribution , this atomizer has a top airflow system that divides through a honeycomb in the internal bell and touches the entire surface of the coil, bringing out all the nuances of flavors.
The Profile M is also designed to be leak-proof , in addition to the exceptional aromatic yield, in fact, this atomizer never leaks!
Wotofo Profile X RTA Atomizer 8ml is the new rebuildable atomizer for lung shooting , the result of meticulous engineering, increasing the performance of the original Profile RTA. With a 8ml tank, the Profile X RTA is a single mesh RTA with the ability to accommodate classic single or dual wire coil setups. This new version also manages the air flow directly from above, avoiding possible liquid spills.
Alien Clapton MTL Ni80 0.63oHm Premade Resistors - Fumytech are pre-made complex resistors for rebuildable atomizers .
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Resistors Mesh NexMesh Turbo A1 Wotofo from 0.13oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
Premade Resistors MTL 26ga Ni80 0.6oHm - Yatchvape are premade resistors for regenerable atomizers .
The 26ga MTL resistors in 0.6oHm Ni80 material are optimized for use on regenerable atomizers with side vape . The coils have an internal diameter of 2.5mm and allow an abundance of cotton in the regeneration phase.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
