Refillable Vaping Accessories

Pre-made Fused MTL Ni80 0.85oHm Coils - Crazy Fab Coils are high quality pre-made complex coils for rebuildableatomizers for cheek vaping .

Pre-made Dual Core Fused Clapton 1.0oHm resistors - HellVape are pre-made complex resistors for rebuildable atomizers .

Alien Clapton MTL Ni80 0.63oHm Premade Resistors - Fumytech are pre-made complex resistors for rebuildable atomizers .

Pre-made Micro Fused Clapton MTL Ni80 0.88oHm resistors - Fumytech are pre-made complex resistors for rebuildable atomizers .

Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .

Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.

PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .

Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys. 

Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.

Mesh 100% Made in Germany

Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .

The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.

Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.

NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.

Recommended power range: 60-80W

Suitable and compatible with Wotofo Profile 1.5.

Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.

The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.

Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.

The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.

Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.

Suitable and compatible with Wotofo Profile 1.5.

Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.

Excellent for a high performance and high aromatic cheek vape.

A necessary tool for a correct realization of regenerable coils.

Tweezers for regeneration, made of stainless steel with ceramic tip.

Premade Resistors MTL 26ga Ni80 0.6oHm - Yatchvape are premade resistors for regenerable atomizers .

The 26ga MTL resistors in 0.6oHm Ni80 material are optimized for use on regenerable atomizers with side vape . The coils have an internal diameter of 2.5mm and allow an abundance of cotton in the regeneration phase.

Resistors Mesh NexMesh Turbo A1 Wotofo from 0.13oHm with measuring 16mm by 6.8mm.

Suitable and compatible with Wotofo Profile 1.5.