Active filters
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Transparent bottle with 500ml safety cap convenient for mixing the neutral base with or without nicotine together with your favorite flavors.
The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .
Transparent bottle with safety cap 1 liter convenient for mixing the neutral base with or without nicotine together with your favorite aromas.
The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .
Silicone Drip Tip Cover - Vapesoon to protect your electronic cigarette spout from dust and dirt . The drip tip cover is also convenient as a protective ring to protect the tank of your atomizer or the body of the pod mod.
The diameter of the protective ring is 20mm and is compatible with all atomizers that have a maximum diameter of 24mm.
Neck strap Electronic cigarette holder necklace - Galactika for pen-shaped electronic cigarettes or disposable cigarettes . Reinforced fabric strap with comfortable silicone musket ring.
Ring diameter 16mm (compatible with most of the pens in circulation such as Kiwi , Zeep etc ...)
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Voopoo silicone cover for DRAG S Kit. It protects the kit from bumps, falls and scratches. It also includes a pod cover and drip tip cap .
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
KIWI Silicon Case Silicone Case for KIWI VAPOR - 2022 Version for Kiwi Vapor Electronic Cigarette.
Give a touch of color to your KIWI with the silicone covers!
More colors and an even more resistant material that protects against scratches and bumps , adapting perfectly to the shape of the Powerbank. A rainbow of colors to elegantly protect the KIWI Powerbank. Protects from scratches and falls, easy to apply and remove .
Create infinite combinations and exclusive looks for your electronic cigarette.
Car Electronic Cigarette Case convenient to use during your travels by car or other. Perfect for keeping your electronic cigarette always at hand . Solid, stable and discreet, the electronic cigarette holder for cars attaches to the horizontal air intakes of your car.
UD Youde Zeep 2 PCC Powerbank silicone cover dedicated to the Zeep 2 PCC Powerbank available in 3 colors and essential for the protection of the PCC from impacts and dirt .
Silicone drip tip cover with protective glass ring for electronic cigarettes. Conveniently protect your tank and drip tip from dirt and dust.
The silicone spout cap is equipped with an extendable rubber band which makes it compatible with many electronic cigarettes.
The diameter of the vape band is 20mm.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
UD Youde 26ga (0.40mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Spongebox Protective Ring for electronic cigarettes with atomizers of various diameters. The Spongebox Protective Ring is a protective measure for those who want to safeguard the health of their device .
The Spongebox, placed halfway between the box mod and the atomizer, allows you to absorb liquid from any leaks.
Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Chubby Bottle Unicorn Style 50ml Transparent. Long and strong PET plastic bottle. Ideal for carrying your liquids always with you, even in your pocket.
Original Chubby Unicorn V3 - Chubby Gorilla 200ml bottle with child proof cap.
These bottles are safe and long-lasting . They can be used to contain your e-liquids without altering the flavor profile and avoiding any loss of liquid.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Protection Ring with Superhero fantasy for electronic cigarette atomizers .
Available in various diameters .
The selection of color and symbol is random among those in the photo.
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Transparent bottle with 500ml safety cap convenient for mixing the neutral base with or without nicotine together with your favorite flavors.
The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .
Transparent bottle with safety cap 1 liter convenient for mixing the neutral base with or without nicotine together with your favorite aromas.
The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .
Silicone Drip Tip Cover - Vapesoon to protect your electronic cigarette spout from dust and dirt . The drip tip cover is also convenient as a protective ring to protect the tank of your atomizer or the body of the pod mod.
The diameter of the protective ring is 20mm and is compatible with all atomizers that have a maximum diameter of 24mm.
Neck strap Electronic cigarette holder necklace - Galactika for pen-shaped electronic cigarettes or disposable cigarettes . Reinforced fabric strap with comfortable silicone musket ring.
Ring diameter 16mm (compatible with most of the pens in circulation such as Kiwi , Zeep etc ...)
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Voopoo silicone cover for DRAG S Kit. It protects the kit from bumps, falls and scratches. It also includes a pod cover and drip tip cap .
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
KIWI Silicon Case Silicone Case for KIWI VAPOR - 2022 Version for Kiwi Vapor Electronic Cigarette.
Give a touch of color to your KIWI with the silicone covers!
More colors and an even more resistant material that protects against scratches and bumps , adapting perfectly to the shape of the Powerbank. A rainbow of colors to elegantly protect the KIWI Powerbank. Protects from scratches and falls, easy to apply and remove .
Create infinite combinations and exclusive looks for your electronic cigarette.
Car Electronic Cigarette Case convenient to use during your travels by car or other. Perfect for keeping your electronic cigarette always at hand . Solid, stable and discreet, the electronic cigarette holder for cars attaches to the horizontal air intakes of your car.
UD Youde Zeep 2 PCC Powerbank silicone cover dedicated to the Zeep 2 PCC Powerbank available in 3 colors and essential for the protection of the PCC from impacts and dirt .
Silicone drip tip cover with protective glass ring for electronic cigarettes. Conveniently protect your tank and drip tip from dirt and dust.
The silicone spout cap is equipped with an extendable rubber band which makes it compatible with many electronic cigarettes.
The diameter of the vape band is 20mm.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
UD Youde 26ga (0.40mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Spongebox Protective Ring for electronic cigarettes with atomizers of various diameters. The Spongebox Protective Ring is a protective measure for those who want to safeguard the health of their device .
The Spongebox, placed halfway between the box mod and the atomizer, allows you to absorb liquid from any leaks.
Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Chubby Bottle Unicorn Style 50ml Transparent. Long and strong PET plastic bottle. Ideal for carrying your liquids always with you, even in your pocket.
Original Chubby Unicorn V3 - Chubby Gorilla 200ml bottle with child proof cap.
These bottles are safe and long-lasting . They can be used to contain your e-liquids without altering the flavor profile and avoiding any loss of liquid.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Protection Ring with Superhero fantasy for electronic cigarette atomizers .
Available in various diameters .
The selection of color and symbol is random among those in the photo.
