Active filters
Wrap for 18650 Mod. E5 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E4 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E3 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E2 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E1 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
UD Youde Titanium Wire 28ga 0.32mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .
UD Youde Titanium Wire 26ga 0.40mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .
UD Youde Ni200 34ga 0.16mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .
UD Youde Ni200 32ga 0.20mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .
Samsung 50S 21700 5000mAh 35A battery is a flat pole battery used as a cell forelectronic cigarettes that support the 21700 type . Can also be used in other devices or in series for battery packs.
There are many quality grades of this cell, we choose the Premium Quality A+++ which is the best in terms of autonomy over time and safety.
Propylene Glycol FULL PG 100ml - Puff is a high quality propylene glycol enclosed in a 100ml bottle . Made from amber plastic, it features a child resistant cap to ensure safety. Inside the bottle you will find 100ml of FULL PG , ensuring enough quantity to satisfy your vaping needs.
Propylene Glycol FULL PG 50ml in 60ml bottle - VAPR is a high quality propylene glycol enclosed in a 60ml bottle . With 99.8% pharmaceutical purity , this product offers you an outstanding vaping experience.
Battery Wrap 18650 - Vendetta with graphics from the movie " V for Vendetta ".
UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .
The steel alloy allows for faster activation than Kanthal A1.
Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .
Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.
PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .
Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys.
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Transparent bottle with 500ml safety cap convenient for mixing the neutral base with or without nicotine together with your favorite flavors.
The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .
Transparent bottle with safety cap 1 liter convenient for mixing the neutral base with or without nicotine together with your favorite aromas.
The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Battery 18650 Vap Procell 3500mAh 25A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.
Battery 18650 Vap Procell 3000mAh 30A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
IMR Efest 3500mAh 20A 18650 battery is a flat pole battery used as a cell for electronic cigarettes which support 18650 type . Can also be used in other devices or in series for battery packs.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
Wrap for 18650 Mod. E5 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E4 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E3 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E2 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E1 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
UD Youde Titanium Wire 28ga 0.32mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .
UD Youde Titanium Wire 26ga 0.40mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .
UD Youde Ni200 34ga 0.16mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .
UD Youde Ni200 32ga 0.20mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .
Samsung 50S 21700 5000mAh 35A battery is a flat pole battery used as a cell forelectronic cigarettes that support the 21700 type . Can also be used in other devices or in series for battery packs.
There are many quality grades of this cell, we choose the Premium Quality A+++ which is the best in terms of autonomy over time and safety.
Propylene Glycol FULL PG 100ml - Puff is a high quality propylene glycol enclosed in a 100ml bottle . Made from amber plastic, it features a child resistant cap to ensure safety. Inside the bottle you will find 100ml of FULL PG , ensuring enough quantity to satisfy your vaping needs.
Propylene Glycol FULL PG 50ml in 60ml bottle - VAPR is a high quality propylene glycol enclosed in a 60ml bottle . With 99.8% pharmaceutical purity , this product offers you an outstanding vaping experience.
Battery Wrap 18650 - Vendetta with graphics from the movie " V for Vendetta ".
UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .
The steel alloy allows for faster activation than Kanthal A1.
Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .
Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.
PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .
Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys.
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Transparent bottle with 500ml safety cap convenient for mixing the neutral base with or without nicotine together with your favorite flavors.
The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .
Transparent bottle with safety cap 1 liter convenient for mixing the neutral base with or without nicotine together with your favorite aromas.
The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Battery 18650 Vap Procell 3500mAh 25A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.
Battery 18650 Vap Procell 3000mAh 30A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
IMR Efest 3500mAh 20A 18650 battery is a flat pole battery used as a cell for electronic cigarettes which support 18650 type . Can also be used in other devices or in series for battery packs.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
