Active filters
UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .
The steel alloy allows for faster activation than Kanthal A1.
USB wall charger 5V-1A 5W - Fumytech is a charger suitable for recharging your devices such as tablets, smartphones and electronic cigarettes requiring low charging power .
Ideal for recharging most of the electronic cigarettes on the market with a built-in battery.
Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .
Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.
PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .
Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys.
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Silicone Drip Tip Cover - Vapesoon to protect your electronic cigarette spout from dust and dirt . The drip tip cover is also convenient as a protective ring to protect the tank of your atomizer or the body of the pod mod.
The diameter of the protective ring is 20mm and is compatible with all atomizers that have a maximum diameter of 24mm.
SXK Mission Booster Drip Tip Kit for Billet Box is a kit consisting of sleeve drip tip with a nut hybrid base for Billet Box or similar AIO systems. Thanks to the nut with grip, you can go and disassemble your nut without using tools , avoiding the risk of scratching the base of your device.
The sleeve is made in POM while the nut structure is in 316 steel .
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Leather Sleeve for LightSaber Long Kit - BP Mods is an original replacement cover for the LightSaber mod (Long Kit 2100mAh) by BP Mods. There Sleeve it is also equipped with an anti-slip system which guarantees perfect adherence to the body of your Box.
Easy to install and aesthetically perfect. You will give an extra aesthetic touch to one of the best mods of 2022.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
PROtocol RBA SXK Bridge Air Pin Set for Billet Box is a spare air pin kit or for SXK\'s SXK RBA.
The kits are composed of spare parts that allow you to modulate the Air Flow Control of the PROtocol RBA.
KIWI Pen Cap Spout Cover - KIWI VAPOR for KIWI Pen . Thanks to the KIWI Pen Cap you will protect the cotton filter or plastic drip tip of your pen .
1 meter long USB Type-C cable suitable for charging your electronic devices , including e-cigarettes, smartphones and any device equipped with the latest generation Type-C input.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
Internal Panels Kraken Cthulhu AIO Box - Cthulhu Mods . The Kraken interior panels are replacement doors of the internal side of the battery that replace the originals, giving an extra aesthetic touch to your AIO Box.
Cthulhu AIO Box Fire Button - Cthulhu Mods is a replacement Fire Button for the Cthulhu AIO Box. Thanks to this fire button you will give an extra aesthetic touch to your device.
Boropad MTL AFC SXK for Billet Box is a compatible Boro Tank accessory for Billet Box and similar AIO Device . The Boropad for Billet Box has a double function: anti-condensation system and air flow reducer . This is the cheek shot (MTL) version.
Boro Unit Tank SXK for RBA Billet Box is a tank with a capacity of 5ml compatible with Billet Box and similar AIO Devices compatible with original Boro.
Boro Tank SXK for Billet Box is a tank with a capacity of 5.5ml compatible with Billet Box and similar AIO Devices compatible with original Boro. Bridge RBA can be installed inside the Boro Tank.
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
415BT V2 Boro Tank SXK for Billet Box is a tank compatible with Billet Box and similar AIO Devices compatible with original Boro. Inside the 415BT V2 Boro Tank you can install Bridge RBA .
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
Cover Drip Tip Zeep 2 Transparent Satin by UD Youde for Zeep 2 Pen Kit . The drip tip cover guarantees greater hygiene safety for your cotton filter or plastic drip tip, in the absence of the Zeep 2 PCC Powerbank.
UD Youde Zeep 2 Black Satin Drip Tip Cover for Zeep 2 Pen Kit . The drip tip cover guarantees greater hygiene safety for your cotton filter or plastic drip tip, in the absence of the Zeep 2 PCC Powerbank.
Silicone drip tip cover with protective glass ring for electronic cigarettes. Conveniently protect your tank and drip tip from dirt and dust.
The silicone spout cap is equipped with an extendable rubber band which makes it compatible with many electronic cigarettes.
The diameter of the vape band is 20mm.
RTA Deck with Mesh for GeekVape Zeus X. The Mesh deck is used with Geekvape micromesh coils, compatible with Zeus X RTA and Zeus X Mesh RTA atomizers.
2 Slot XTAR MC2 Plus rechargeable battery charger . Dual slot charger for 3.6V / 3.7V lithium-ion batteries with battery level indicator.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
Magnetic USB Type-C for Quawins P ower Bank VStick Pro Quawins This magnetic adapter allows you to plug your e-cigarette into the magnetic compartment of the Quawins Quawins Pro power bank.
UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .
The steel alloy allows for faster activation than Kanthal A1.
USB wall charger 5V-1A 5W - Fumytech is a charger suitable for recharging your devices such as tablets, smartphones and electronic cigarettes requiring low charging power .
Ideal for recharging most of the electronic cigarettes on the market with a built-in battery.
Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .
Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.
PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .
Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys.
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Silicone Drip Tip Cover - Vapesoon to protect your electronic cigarette spout from dust and dirt . The drip tip cover is also convenient as a protective ring to protect the tank of your atomizer or the body of the pod mod.
The diameter of the protective ring is 20mm and is compatible with all atomizers that have a maximum diameter of 24mm.
SXK Mission Booster Drip Tip Kit for Billet Box is a kit consisting of sleeve drip tip with a nut hybrid base for Billet Box or similar AIO systems. Thanks to the nut with grip, you can go and disassemble your nut without using tools , avoiding the risk of scratching the base of your device.
The sleeve is made in POM while the nut structure is in 316 steel .
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Leather Sleeve for LightSaber Long Kit - BP Mods is an original replacement cover for the LightSaber mod (Long Kit 2100mAh) by BP Mods. There Sleeve it is also equipped with an anti-slip system which guarantees perfect adherence to the body of your Box.
Easy to install and aesthetically perfect. You will give an extra aesthetic touch to one of the best mods of 2022.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
PROtocol RBA SXK Bridge Air Pin Set for Billet Box is a spare air pin kit or for SXK\'s SXK RBA.
The kits are composed of spare parts that allow you to modulate the Air Flow Control of the PROtocol RBA.
KIWI Pen Cap Spout Cover - KIWI VAPOR for KIWI Pen . Thanks to the KIWI Pen Cap you will protect the cotton filter or plastic drip tip of your pen .
1 meter long USB Type-C cable suitable for charging your electronic devices , including e-cigarettes, smartphones and any device equipped with the latest generation Type-C input.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
Internal Panels Kraken Cthulhu AIO Box - Cthulhu Mods . The Kraken interior panels are replacement doors of the internal side of the battery that replace the originals, giving an extra aesthetic touch to your AIO Box.
Cthulhu AIO Box Fire Button - Cthulhu Mods is a replacement Fire Button for the Cthulhu AIO Box. Thanks to this fire button you will give an extra aesthetic touch to your device.
Boropad MTL AFC SXK for Billet Box is a compatible Boro Tank accessory for Billet Box and similar AIO Device . The Boropad for Billet Box has a double function: anti-condensation system and air flow reducer . This is the cheek shot (MTL) version.
Boro Unit Tank SXK for RBA Billet Box is a tank with a capacity of 5ml compatible with Billet Box and similar AIO Devices compatible with original Boro.
Boro Tank SXK for Billet Box is a tank with a capacity of 5.5ml compatible with Billet Box and similar AIO Devices compatible with original Boro. Bridge RBA can be installed inside the Boro Tank.
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
415BT V2 Boro Tank SXK for Billet Box is a tank compatible with Billet Box and similar AIO Devices compatible with original Boro. Inside the 415BT V2 Boro Tank you can install Bridge RBA .
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
Cover Drip Tip Zeep 2 Transparent Satin by UD Youde for Zeep 2 Pen Kit . The drip tip cover guarantees greater hygiene safety for your cotton filter or plastic drip tip, in the absence of the Zeep 2 PCC Powerbank.
UD Youde Zeep 2 Black Satin Drip Tip Cover for Zeep 2 Pen Kit . The drip tip cover guarantees greater hygiene safety for your cotton filter or plastic drip tip, in the absence of the Zeep 2 PCC Powerbank.
Silicone drip tip cover with protective glass ring for electronic cigarettes. Conveniently protect your tank and drip tip from dirt and dust.
The silicone spout cap is equipped with an extendable rubber band which makes it compatible with many electronic cigarettes.
The diameter of the vape band is 20mm.
RTA Deck with Mesh for GeekVape Zeus X. The Mesh deck is used with Geekvape micromesh coils, compatible with Zeus X RTA and Zeus X Mesh RTA atomizers.
2 Slot XTAR MC2 Plus rechargeable battery charger . Dual slot charger for 3.6V / 3.7V lithium-ion batteries with battery level indicator.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
Magnetic USB Type-C for Quawins P ower Bank VStick Pro Quawins This magnetic adapter allows you to plug your e-cigarette into the magnetic compartment of the Quawins Quawins Pro power bank.
