Active filters
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Silicone Drip Tip Cover - Vapesoon to protect your electronic cigarette spout from dust and dirt . The drip tip cover is also convenient as a protective ring to protect the tank of your atomizer or the body of the pod mod.
The diameter of the protective ring is 20mm and is compatible with all atomizers that have a maximum diameter of 24mm.
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Battery 18650 Vap Procell 3500mAh 25A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.
Battery 18650 Vap Procell 3000mAh 30A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
IMR Efest 3500mAh 20A 18650 battery is a flat pole battery used as a cell for electronic cigarettes which support 18650 type . Can also be used in other devices or in series for battery packs.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
The Sony VTC6A 18650 3000mAh and 25A battery represents excellence in the world of electronic cigarette batteries, offering an optimal combination of duration and power for vaping enthusiasts. With a capacity of 3000mAh and a nominal voltage of 3.7V , this IMR type lithium ion battery is ideal for powering a wide range of Box Mods, both electronic and mechanical.
Silicone drip tip cover with protective glass ring for electronic cigarettes. Conveniently protect your tank and drip tip from dirt and dust.
The silicone spout cap is equipped with an extendable rubber band which makes it compatible with many electronic cigarettes.
The diameter of the vape band is 20mm.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
UD Youde 26ga (0.40mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Spongebox Protective Ring for electronic cigarettes with atomizers of various diameters. The Spongebox Protective Ring is a protective measure for those who want to safeguard the health of their device .
The Spongebox, placed halfway between the box mod and the atomizer, allows you to absorb liquid from any leaks.
Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Protection Ring with Superhero fantasy for electronic cigarette atomizers .
Available in various diameters .
The selection of color and symbol is random among those in the photo.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
Cloud 9 Cotton is an Australian cotton. 100% cotton of the highest quality. Great for flavor and high wattage lung vape .
The Cloud 9 is characterized by being a 100% natural cotton. No chemical treatment. No bleaching. Neutral flavor.
Battery Cell / Rechargeable 18350 Battery 1100mAh 9A - Listman .
Compatible with electronic cigarettes and other devices.
Standard 18650 battery / cell wrap for electronic cigarettes.
Zombie iconography.
Bring a frenetic color fantasy to life with custom icon-themed wraps.
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Silicone Drip Tip Cover - Vapesoon to protect your electronic cigarette spout from dust and dirt . The drip tip cover is also convenient as a protective ring to protect the tank of your atomizer or the body of the pod mod.
The diameter of the protective ring is 20mm and is compatible with all atomizers that have a maximum diameter of 24mm.
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Battery 18650 Vap Procell 3500mAh 25A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.
Battery 18650 Vap Procell 3000mAh 30A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
IMR Efest 3500mAh 20A 18650 battery is a flat pole battery used as a cell for electronic cigarettes which support 18650 type . Can also be used in other devices or in series for battery packs.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
The Sony VTC6A 18650 3000mAh and 25A battery represents excellence in the world of electronic cigarette batteries, offering an optimal combination of duration and power for vaping enthusiasts. With a capacity of 3000mAh and a nominal voltage of 3.7V , this IMR type lithium ion battery is ideal for powering a wide range of Box Mods, both electronic and mechanical.
Silicone drip tip cover with protective glass ring for electronic cigarettes. Conveniently protect your tank and drip tip from dirt and dust.
The silicone spout cap is equipped with an extendable rubber band which makes it compatible with many electronic cigarettes.
The diameter of the vape band is 20mm.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
UD Youde 26ga (0.40mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Spongebox Protective Ring for electronic cigarettes with atomizers of various diameters. The Spongebox Protective Ring is a protective measure for those who want to safeguard the health of their device .
The Spongebox, placed halfway between the box mod and the atomizer, allows you to absorb liquid from any leaks.
Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Protection Ring with Superhero fantasy for electronic cigarette atomizers .
Available in various diameters .
The selection of color and symbol is random among those in the photo.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
Cloud 9 Cotton is an Australian cotton. 100% cotton of the highest quality. Great for flavor and high wattage lung vape .
The Cloud 9 is characterized by being a 100% natural cotton. No chemical treatment. No bleaching. Neutral flavor.
Battery Cell / Rechargeable 18350 Battery 1100mAh 9A - Listman .
Compatible with electronic cigarettes and other devices.
Standard 18650 battery / cell wrap for electronic cigarettes.
Zombie iconography.
Bring a frenetic color fantasy to life with custom icon-themed wraps.
